Free Energy – Power Generator
First independant FREE energy Generator with NO moving parts!
Charls Flynn has a US Patent from 1997 on the Generator Core!
Read more about it and many other great inventions on free energy devices in the PJKBOOK PDF on: “www.free-energy-info.co.uk”
Duration : 0:10:34
free solar |diy solar|residential solar|diy solar panels
Bookmark
Related Posts
November 27, 2009
12:23 am
What if these …
What if these devices get energy from some external source?
November 27, 2009
12:23 am
It would have a …
It would have a better efffect if you would make it.
November 27, 2009
12:23 am
I often perceive …
I often perceive these and similar inventions based on the Bedini principle. The rarely admitted fact is that the extractable amounts of energy are very little (in the mWatt range from kg mass of iron cores). Symmetric pre-magnetization (periphery) with inner decompensation as shown here will NOT help either, on this occasion. Liquid magnets are a recent development which is a more promising approach. (Elementar-magnets suspended in a dense but non-viscous organic solubilizer)
November 27, 2009
12:23 am
Could you send me …
Could you send me the diagrams.
I know what is in the pdf works.
There are many examples of this flux breaking in the pdf.
Thank you.
November 27, 2009
12:23 am
Small pulses of …
Small pulses of current through coils L1 do, indeed, change the flux path of the permanent magnets. I built the Flynn core of this device months ago, in four pieces. Small current pulse (AAA battery) causes one side core to clamp on and other side to fall off. Force is more than double what each magnet delivers by itself. L1 pulse simply diverts permanent magnetic circuit from counter-clockwise to clockwise, or vice versa.
Thanks, Guru2You!
November 27, 2009
12:23 am
how many watts …
how many watts input and how many watts output?
November 27, 2009
12:23 am
Ok, I am no expert …
Ok, I am no expert or anything but doesn’t an AC current need a “push” not just a flip flop if you get what I mean.
As in this system it flips but it doesn’t give a drag like if you go with a magnet over a coil, you have to go past it not just still, so to get a flow of electrons (very small flow, the electrons move back and forth non the less).
+schematic looks simple enough but why haven’t you build it for yourself and shown us here? As that confuses me and makes me disbelieve it.
Thanks
November 27, 2009
12:23 am
Could you possibly …
Could you possibly send me a copy of more detailed plans. I would like to build a working system myself.
November 27, 2009
12:23 am
live2laugh111, get …
live2laugh111, get UPDATE, get some education. kids in 1 grade know that changing polarity is generating electricity. take a peak for “Kapanadze” This man,is form Georgia, this is country in the middle east, if you don’t know. His MEG is not working too.. and it is 5KW, also in Turkey they made 100KW generator, by his idea..if you don’t know how to do it, don’t hesitate the others. this principle is dully simple.
November 27, 2009
12:23 am
Don’t waste your …
Don’t waste your time on this, it won’t work!! I’ve built plenty of these types of magnetic flux switching circuits (including the one shown) and they WILL NOT PRODUCE ANY ELECTRICITY.
You have to have some sort of motion associated between magnet and core in order to produce electricity. A mere change in flux won’t do it, despite what Faraday claims (try it if you don’t believe me).
Ted
November 27, 2009
12:23 am
how do you get a …
how do you get a patent without a working unit ?
November 27, 2009
12:23 am
the first …
the first succesfull unit needs to be build
to prove the concept….
November 27, 2009
12:23 am
very low volume …
very low volume sound…..i have to close my ear on my speakers
November 27, 2009
12:23 am
The capacitor (50µF …
The capacitor (50µF) used to switch the transistor can be a normal polarized one but I think the polarity has to be wired the wrong way. The other one has to be bipolar (non-polarized).
November 27, 2009
12:23 am
Are both capatitors …
Are both capatitors non-polorized ?
November 27, 2009
12:23 am
Since it seems to …
Since it seems to be difficult to get core material that can handle higher frequencies it seems best to tune the powering circuit directly to the desired output frequency and give L3 so many windings that you reach the desired output voltage directly (without power converter).
And now, YES we will need another separate L3 coil with way less windings to reach the 12 Volt to power the input.
November 27, 2009
12:23 am
¡Hola, yo no he …
¡Hola, yo no he construido el generador! Usted le debe desarrollar su ser (diámetro de Alambre/vueltas/tamaño de centro de hierro…. Los más fuertes sus imanes el mejor (Neodym N52). Usted puede enrollar L2 como un aircore o combinar con un rollo L1 (bifiliar). ¡!!! ¡L3 tiene que tener para duplicar por lo menos la masa de cobre que L1!!! Ejemplo: L3 = 1 Kg/L1 = 0,5Kg & L3 = 1 Mm/L1 = 0,2mm Lea (lo traduce) todos los comentarios al video.
Tome Cuidado
November 27, 2009
12:23 am
quisiera armarlo …
quisiera armarlo pero le faltan datos como seria:
de que tamaño es el laminado, el diámetro de las bobinas, cuantas vueltas llevan las bobinas, los imanes son de neodimio o ferrita, la bobina l2 se monta encima de l1 o se coloca a un lado lleva núcleo de aire o de fierro, deberías de dar mas datos.
?usted ya la armo, y le funciono
Perdoné por escribir en español.
November 27, 2009
12:23 am
I know this is a …
I know this is a little bit of topic but take a look at the “RODIN COIL” on youtube.
November 27, 2009
12:23 am
No, sorry it won’t …
No, sorry it won’t work. If you really believe it will, build one and demonstrate it.
November 27, 2009
12:23 am
In short: “yes”
In short: “yes”
November 27, 2009
12:23 am
When somebody …
When somebody builds it
November 27, 2009
12:23 am
!Keep in mind the …
!Keep in mind the difference in distance! (permanent North to permanent South & permanent North to coil South)
November 27, 2009
12:23 am
!!! L3 has to have …
!!! L3 has to have at least double the mass of copper than L1 !!!
Example: L3 = 1Kg / L1 = 0,5Kg & L3 = 1mm / L1 = 0,2mm
Read all the comments to the video and read the PDF file befor asking questions please.
Take Care
November 27, 2009
12:23 am
this is what tom …
this is what tom baerden did with his meg, right?